PTSolns Prototyping Solderable Breadboard PCB Kit (Proto Mix Deluxe)
PTSolns Prototyping Solderable Breadboard PCB Kit (Proto Mix Deluxe)
Couldn't load pickup availability
NOTE: For large quantity orders with custom pricing please contact us directly.
This product has a datasheet (Proto-Full)!
This product has a datasheet (Proto-Half)!
This product has a 3D model (Proto-Full)!
This product has a 3D model (Proto-Half)!
This product has a Fritzing model (Proto-Half)!
Also available on
Overview
The Proto-Full and Proto-Half PCBs are part of the Canadian designed PTSolns Proto-Series. These PCBs are solderable breadboards / prototyping boards with the Proto-Full having 930 tie-points and the Proto-Half having 450 tie-points. These boards offers many features and improvements over the traditional prototyping boards, making them the most advanced boards on the market. These boards are designed with the user in mind, giving the most flexibility and customizability to your project. Some of the key features include:
- Silkscreen printing on both sides. Dashed white lines indicate electrical connection.
- Separate ground and negative, which can be connected.
- 2 power-in methods: A) screw terminal, B) female power jack (2.1mmX5.5mm).
- 4 M3 mounting holes: A) able to be separately grounded, B) able to stack multiple boards.
- Proto-Full: 4 positive and 4 negative power rails, Proto-Half: 2 positive and 2 negative power rails.
- Centre rail, which can be connected to ground.
Technical Specifications
PCB width: 58.4mm, PCB length: 200.7mm (Proto-Full)/116.8mm (Proto-Half), PCB thickness: 1.6mm
PCB surface finish: Lead free HASL-RoHS
Mounting hole diameter: 3.2mm (M3)
Electrical connection: See schematic
Frequently Asked Questions
Q: Why is the board not soldered and assembled?
A: These prototyping boards have many possible configurations. For example, the power rails are disconnected by default, allowing the user to arrange them that best suits their projects. Using the 2-Pin jumper caps further allows to enable and disable particular sections of the board. For these reasons, the Proto boards are not assembled and all features are disabled by default.
Q: The footprint of the female power jack is strange...
A: Yes it is! The footprint for the female power jack is designed so that a user can solder the component on both sides of the board. This is why there are four solderable holes, and not just three.
Product Package
- 1 pc PTSolns Proto-Full PCB & 2 pcs PTSolns Proto-Half PCBs
- 3 pcs female power jacks (2.1mmX5.5mm)
- 3 pcs 2.54mm 2-pin screw terminals
- 3 pcs 2.54mm 1X40 pin male headers
- 50 pcs 2.54mm 2-pin jumper caps
- Standoff set (M3): 50 brass hex standoffs (5 sizes), 50 hex nuts, 50 bolts
- User guide
Other Resources
- Check our YouTube channel for videos that cover this topic.
NOTE 1: Some components could be a choking hazard for young children. Please exercise caution.
